Tuesday, November 3, 2015

Test Plates, Part Two

This second test plate has been at once a failure and a great success. The image certainly is not what I was expecting, or even what I was hoping, but I think it did me some good to see how it changed with multiple roll ups and to get a better idea of how the process of century-plate lithography works. The first etch, to be rolled up in an umber ink, was not nearly as hot as it needed to be, and so I had only a faint print with this runnier, colored ink. Thankfully, this plate was a chance to practice additions and deletions, and so I set about a counter etch to remove parts of the image. After some small additions and the repeat of the etching process, I rolled up a new set of proofs, among which were the now two-layered prints in umber and black. I can now say that I failed. My counter etch was seemingly ineffective, becoming increasingly dark as the roll ups in black continued. The additions (as the deletions were only apparent for a couple of passes) ended up looking like part of the original set of proofs, hidden by successful registration.


Looking at this photo, there are only a few spots where the first etched image shows through, and unfortunately, that is a result of poor registration. I suspect that as we begin sketches for our first editions of this class, I will be leaning towards a single pass design, as I can always adjust the image after the print process. 

Thanks for taking a look,
B. Wright

No comments:

Post a Comment