Showing posts with label Schoolwork. Show all posts
Showing posts with label Schoolwork. Show all posts

Tuesday, November 3, 2015

Test Plates, Part Two

This second test plate has been at once a failure and a great success. The image certainly is not what I was expecting, or even what I was hoping, but I think it did me some good to see how it changed with multiple roll ups and to get a better idea of how the process of century-plate lithography works. The first etch, to be rolled up in an umber ink, was not nearly as hot as it needed to be, and so I had only a faint print with this runnier, colored ink. Thankfully, this plate was a chance to practice additions and deletions, and so I set about a counter etch to remove parts of the image. After some small additions and the repeat of the etching process, I rolled up a new set of proofs, among which were the now two-layered prints in umber and black. I can now say that I failed. My counter etch was seemingly ineffective, becoming increasingly dark as the roll ups in black continued. The additions (as the deletions were only apparent for a couple of passes) ended up looking like part of the original set of proofs, hidden by successful registration.


Looking at this photo, there are only a few spots where the first etched image shows through, and unfortunately, that is a result of poor registration. I suspect that as we begin sketches for our first editions of this class, I will be leaning towards a single pass design, as I can always adjust the image after the print process. 

Thanks for taking a look,
B. Wright

Tuesday, October 27, 2015

Test Plates

We're about halfway through our fall term of what, if all goes according to plan, will be my last year seeking a bachelor's degree. One of the exciting things about this new school year is the start of a sequence of printmaking classes which will approach a different method each term. Having skipped the introductory course to take the upper division coursework necessary to graduate, I've been thrown headfirst into bio-based lithography, a part of the sequence described as experimental. Instead of the three editions normally expected of the students, we will be completing two editions, the design of which we begin next week, and have spent the first half of the term working with test plates to determine the effects of certain mark-making tools and tweaks to the process we've been taught.


This first plate was made as our professor guided us through the process for the first time, with the only goal being to create a grid of different experiments to roll up in a black ink. Taking detailed notes along the way, we presented proofs on newsprint and drawing paper to discuss successes or failures. I feel like most of the plate came out how I expected, and though there are certainly mark-making techniques I prefer, they all seemed to have potential uses. 


Following that initial test will be a color roll up on a rebuffed plate. As we will be using different inks, my goal is essentially the same, to see how different marks layer and hold up to our etching process. This plate is not required to be designed around a grid, but as we will not be working on it for more than a week, it is sort of a rush to see the process through and I admit I have not worried too much about how the finished image will look as an edition. Before the week is out, I'll be proofing with color inks and giving additions or subtractions a try to proof with multiple layers.

Until next time,
B. Wright


Friday, June 12, 2015

A Term in Preview

Over the past three months, I have been in a class which explores the human form in ceramics. I am a little torn on what I've made, as my confidence in fine detail and the general form was overshadowed by issues with presentation. Due to some faulty construction, the self portrait bust has lost some hair, not to mention a surface treatment which is so busy it distracts from the sculpted detail. 


My final project, a mobile of sorts, ended up looking a little shoddy, again, having lost components in the firing and reduction process. This piece was also poorly designed, and will be reconstructed in a more interesting manner.


For the moment, this is where the two "big" pieces stand, but over the course of the next week, I'll be reconstructing and redesigning my work. When that process is finished, I'll throw some photos up for you to inspect.

Thanks for looking,
B. Wright

Thursday, June 4, 2015

Pit Fire 2015

This Tuesday, the Ceramics portion of our Art Department took a day-long trip to Cape Kiwanda on the Oregon Coast. As per the annual tradition, a pit was dug and lined with (relatively) dry logs. Stacking bisqueware on top of the wood, The whole pile was lit and allowed to burn for a couple of hours, before a layer of sand sealed in the heat and smoke. What follows is a selection of photos which do not display the process in its entirety, but hopefully give some idea of the day's proceedings.




Thanks for looking,
B. Wright

Saturday, May 9, 2015

The Bust, Pre-Firing

Over the last month or so, I have been taking a 300 Level course on ceramics and the human form. After practicing with single-feature studies, the class was tasked with making busts of ourselves, in life size and with the appropriate proportions, which made for quite a bit of measurement. The sculpting process is finished and the kilns are loaded, so I thought it high time I share what I've been working on. I don't have photos of the initial blocking out of the head (for which a 25 lb. bag was nearly too small) but will show the process from building the lips to the finished head.





From here, the photos will show a turn-around of each day's session's progress.

The addition of an actual neck:





Hollowing out the skull and adding hair:






...and the finished turn-around:









A couple photos had to go, as they too clearly showed some of my classmates and their work, but hopefully the bust is still clear from most perspectives.

Thanks for taking a look,
B. Wright


Wednesday, May 21, 2014

Life Drawing 2.8 // Raku Firing

Short pose, Tuesday evening pages and a skeletal landmark exercise started in class. We've been talking about boney landmarks for a couple of weeks so it was fun to place them on an actual drawing, though we only had a short while to do so.




Last week we raku fired sculptures in the outbuilding. I do not yet have my piece on hand, but here are some thoughts from the process, as I had plenty of time to sit and write as the kiln heated up.


As always, thanks for looking,
B. Wright


Tuesday, April 8, 2014

Life Drawing 2.2

Just a quick batch of photos today. We had a new model for the evening session, and I tried a different technique tonight. In class today, we received graphite pencils, the sort with no wood, just graphite. Warm up drawings were very short, so I just used a ballpoint, but for the long pose I tried the graphite pencil. Wrapping things up, we were given the pencils to work on gesture drawings, one of which I have thrown in for this post.




If anyone has anything to add, please do.

Have a good Tuesday,

B. Wright

Friday, April 4, 2014

Blind Contours

So, I may have fibbed about how classwork will be posted. Generally, I will put work up at the end of the term, but I had a few minutes after class and decided to scan the drawings we worked on that day. What follows is a series of blind contour drawings, each done over five to ten minutes with the model from "Life Drawing Three", Diane, whose name I hope I have spelled correctly.






Some are more accurate than others. If anyone has anything to add, please do.

Thanks for taking the time,
B. Wright

Wednesday, March 19, 2014

Summary of a Term

With only one final to go, and a handful of days to prepare, I suppose I ought to go back through this past term of college, putting up work that didn't find its way into a blog post. Unfortunately, that doesn't amount to much, so I'm rolling another miniatures post into this. First, there is my first sculpture project. Sculpture is, in theory, one of my concentration areas for undergraduate studies, but due to scheduling issues in the art department, I am unable to continue sculpture next term, and will be taking a ceramics course until I can return to sculpture in autumn. Our second project was much larger, and with less time to work and more to be done, I did not finish the piece as I would have chosen. Until I have a chance to work on the piece more, which is currently being graded, I will not be putting up photos. So, project one...





I also have a handful of extra sketches from the few life drawing sessions I attended. For the most part, these images are just preparatory work, and include the gesture drawings for the very first session, which are pretty sloppy. The first image is from the end of the second session and the second image comes from the gesture drawings at the beginning of the third session. I will be taking a life drawing course this term, as well as attending the evening sessions, so there should be plenty of images popping up over the next few months.